‘Tis the season for merry mice! Here’s how to make a four to five inch high mouse that will add a festive note to any tabletop or tree.
- Felt or other cloth
- Pipe cleaners for arms
- Waxed linen for whiskers
- Buttons or beads for eyes
- Stuffing and small gravel
- Scraps of cloth for clothing
Notes on materials:
You could make these critters out of any fabric at all — calico, for instance, or old socks. I use acrylic felt because I have a ton on hand from my days of craft fair booth-making. If you can afford it use wool felt, but fair warning, it’s pricey.
Also, I use pipe cleaners for arms because I like them to be bendable, but you could stuff the jacket arms instead.
- Turning tool (chopstick or knitting needle);
- Doll making needle (not necessary but nice);
- Wire cutters (if using pipe cleaners)
- Seam ripper or awl for poking holes (not shown).
For the ears, cut outer layer out of black felt and inner out of pink (slightly smaller than the black). Sometimes I glue the pink on black. Other times, I skip the glue and rely on stitching.
Curved ears for mice. Pointy ears for cats. Drapey ovals for dogs.
Cut oval bases to size. They don’t have to match.
To make the body, sew up sides and then secure an oval base. It could not be easier. Only two tricks and one suggestion here:
- Keep NECK OPENING WIDE for ease of reversing to right sides after base attached. You can always take a tuck or two later but (especially if using thick wool), too small an opening makes reversing to right sides impossible.
- When sewing the base on, be sure to place the TAIL ON THE INSIDE and snake it up the inside. This way, when you turn it right-side-out, the tail comes out of where you want it. I usually center the tail between the base’s two side seams.
- Lastly, make oval much larger than necessary so that precision is not required when attaching to the body.
Using an awl or another sharp implement, poke ear holes in the head and insert ears. Stitch, going back and forth between ears or down through the neck rather than sewing one ear first, then the other. It’s much easier. Don’t worry if your holes are too big. Felt is very forgiving.
I haven’t decided whether it’s more efficient to stuff the head first or not. Probably easier to stuff, then insert ears. Certainly by the time you’re attaching eyes, you want the head stuffed.
Attach teeny buttons or seed beads for eyes, again stitching side to side. You can also stitch the eyes.
This head exemplifies not just stitched eyes, but a short cut for when you’ve run out of ears: put a kerchief on. Or a Santa hat!
Cut small lengths of waxed linen, fold, and stitch in place for whiskers. Again, sew side to side. In a pinch, you can use embroidery floss. I usually have to trim the whiskers down after sewing them onto the nose.
This is my way of making arms and a hanging loop simultaneously, but you could use a straight piece of pipe cleaner and attach a thread as hanging loop instead. Also, you could make your arms integral to the jacket and skip the pipe cleaner altogether.
Polar fleece is great because it doesn’t fray and more, because I have a bin left over from when I taught third graders mitten and hat-making. (Note: the above mouse’s jacket is secured by straight pins. When I get a second, I’ll replace them with buttons, but I don’t have to, really. Be mindful of recipient. A child might be better with buttons).
By the way, to say the obvious, these are SEWN FELT mice, not NEEDLE FELTED MICE.
For darling examples of felted mice, see pix from Instagram, here: MollyDollyNatural.
I plan to learn needle felting someday. It looks like so much fun, doesn’t it?